10 Watt Stereo Amplifier Circuit Using TDA2009A

This circuit is a circuit diagram amplifer. This amplifier circuit has a power of 10 watts. This amplifier circuit is very suitable to apply to your car audio. This amplifier using IC TDA2009A,  as amplifeir power. To avoid excessive heat in the IC using some heat sink compound between the heat sink & the IC. C1 & C2 is the input coupling capacitor and blocks DC, as well as C10 & C11 which is the output capacitor Kopel, and C6 & C7 which blocks the DC from the feed back loop. R1/R2 (and R3/R4) Set the level of feedback. The following is a schematic drawing:

Get together with 1 (R1/R2) = 68 or 37 dB. C8/R5 (and C9/R6) provides high frequency stability where loudspeaker inductive reactance load can become excessive. C4 and C5 provide power decoupling or filtering. Absolute maximum supply voltage is 28V for the amplifer.

Reprinted Url Of This Article:
http://www.hqew.net/circuit-diagram/10-Watt-Stereo-Amplifier-Circuit-Using-TDA2009A_2933.html