stereo-amplifier-ic-TDA1554-22W- 22W

This circuit is a circuit-watt amplifier size at a reasonable 22W 22W. This is the mod is perfect for listening at home or in any vehicle. Is a simple circuit. Use small pieces of equipment and an IC. Is only one number TDA1554Q. And within a short-circuit protection circuit with the output.

Principle of the circuit is. Circuit to receive input on each channel C1 and C2. This will signal coupling or filter out specific signal only The left channel input signal as the right to work. So I explained just left alone. Signal to pass from C1 to the Pin 1 and pin 2 of IC1. This position will stand a horizontal leg inverter protest Amplifiers not to phase out the output pin 6. And the second leg is the leg position in a power amplifier to phase Ting. Out through the output pin 8. Which will be seen that output and second legs are legs 6 and Pin 8 are phase signals the opposite is to provide power W increases itself. Power consumption power that job. to use up about 5 A at 12V. The speaker will use a 4 ohm speakers so the sound is currently 22 watt, but if it uses any 8 ohm speaker. But Watts will be lowered again. While working in the circuit will generate heat at the IC Therefore the disc cooled.