LED warning water the plants with ic 4093

Electronic users love trees. But no time and work and forget Enjoy water the plants.So the trees dry out.This circuit solves this problem.It also allows us to not water the plants with too often.
Operation of the circuit. When the supply to the circuit. IC1 / 1 (IC 4093) will work together R1, R2, D1 and C2 is the Oscillator generator.The output at Pin 11 is a rectangular pulse to IC1/2.To return the logic state is out of the opposite pin 3.In addition, the signal from the pin 11 will be issued to the temple ground. be test point A and test point B.It will be resistance.Make a signal to stimulate IC1/3, IC1/4.Which is parallel to the current output is high enough to make the LED light.The signal from IC1 / 2 VR1 is a fine stream that flows into IC1 / 3 and IC1 / 4. To suit the soil to measure.If the ground for us to measure the humidity Li LED1 will light extinguishes.And if the ground is dry LED1 light depending on adjustments VR1.