This stereo headphone amplifier device may provide up to ten
channels of headphone monitoring if a 1/4” Link Input/Output jack is provided
for connecting two RA53 units together. The schematic below illustrates a
possible operation for this RA53 stereo headphone amplifier.
As you can see, the headphones are connected to the
outputs on the front panel side, when the others to the rear panel. Another
connection possibility can be:
1. The Left and
Right Inputs to the RA53 are connected to the mixer’s sub outputs, but could be
connected to auxiliary sends or even main outputs.
2. The RCA Auxiliary
Inputs are connected to a playback deck.
3. For individual monitoring, a
stereo TRS connector could be plugged into a stereo
auxiliary send from the
mixer to an Insert jack on the RA53. This way, different
material may be
monitored on Channels 1 and/or 2 than that of the main inputs.
No comments:
Post a Comment